Can I remove it once it has been installed?

The tape is designed for permanent use. Removal requires solvents and/or abrasive materials. If you intend to remove the installation you should use temporary tape, which is the double-sided tape typically supplied by hardware and stationery stores. The tape we supply is designed for permanent installation and is difficult to remove. We supply temporary tape [...]

By |2019-05-20T09:27:21+00:00May 20th, 2019||Comments Off on Can I remove it once it has been installed?

I’m no handyman. How difficult is it to install?

We assume that the person applying the product has basic household skills. For example, people who are competent in simple hobbies such as basic sewing or fixing simple things around the house should have no difficulty in applying the materials. Basic carpentry skills are required for some window types (e.g., sliding aluminium windows). Installation instructions [...]

By |2019-05-20T09:27:29+00:00May 20th, 2019||Comments Off on I’m no handyman. How difficult is it to install?

Can it be used on the outside of a window?

Ideally you should place the membrane on the INSIDE frame of the existing window, however in a protected position (e.g. under the eave and perhaps behind an insect screen) it will perform almost as well as on the inside.

By |2019-05-20T09:27:37+00:00May 20th, 2019||Comments Off on Can it be used on the outside of a window?

Do you have a showroom where I can see your product installed?

We sell by mail order so we do not have showrooms. This ensures the price of our product is as low as possible. We have many photographs of our product on our website, showing windows with the intelligent insulation system already installed, and photographs of the simple installation steps being followed. If you would like [...]

By |2019-05-20T09:27:43+00:00May 20th, 2019||Comments Off on Do you have a showroom where I can see your product installed?

Is there ever any problem with condensation in the sealed air gap?

This can occur but is preventable. To avoid condensation in the sealed air gap we recommend applying the membrane system when the air humidity is low. You should also check that there is no moisture trapped between the glass and the frame, that windows fit properly into the frames, that timber is well seasoned, and [...]

By |2019-05-20T09:27:56+00:00May 20th, 2019||Comments Off on Is there ever any problem with condensation in the sealed air gap?

What warranties do you provide?

ClearComfort is covered by normal guarantees, that is, that the product will do what we say it will do. Our products have served our customers well for more than two decades in Australia, and are guaranteed against deterioration. However because the installation is done by the customer, we cannot guarantee workmanship.

By |2019-05-20T09:28:04+00:00May 20th, 2019||Comments Off on What warranties do you provide?

Can you come to my house to install it?

We are not able to visit your home to offer assistance. However, installation instructions are provided with the kit and are found on our web site. Unless you are dealing with specific types of window, such as sliding aluminium windows, it is a remarkably simple operation. If you have a problem, we can offer telephone [...]

By |2019-05-20T09:20:03+00:00May 20th, 2019||Comments Off on Can you come to my house to install it?

It looks like it is very thin – how easily is it damaged? What happens when you bump it? What about children poking it?

Yes, the membrane is very thin (25 microns) but very tough and tear-resistant. It will bounce back if poked, pushed, bashed - even if you break the glass behind it. However, it can be damaged by slashing with a very sharp object such as a razor blade, and will melt if a naked flame is [...]

By |2019-05-20T09:20:10+00:00May 20th, 2019||Comments Off on It looks like it is very thin – how easily is it damaged? What happens when you bump it? What about children poking it?
Go to Top